Connecting To An Iphone
Follow these steps to connect your hearing aids to your iPhone:
You can also visit Apples website to:
- Check if your hearing aids are iPhone compatible.
- See more detailed instructions on how to set up your hearing aids.
Heres an example of how the remote mic feature works with an iPhone-compatible hearing aid.
Phones That Currently Work
At present, the only true Made For Android hearing aids available are the LiNX Quattro and possibly the Starkey Livio AI. They will only directly connect to Pixel 3 and 3a mobile phones that have been updated to Android 10 and Samsung Galaxy 10 S10 and S10+ phones that have been updated to Android 10.
Audio Packet Format And Timing
Packing audio frames into packets lets the hearing instrument derive timing from the link layer timing anchors. To simplify the implementation:
- An audio frame should always match the connection interval in time. For example, if the connection interval is 20ms and sample rate is 16 kHz, then the audio frame shall contain 320 samples.
- Sample rates in the system are restricted to multiples of 8kHz to always have an integer number of samples in a frame regardless of the frame time or the connection interval.
- A sequence byte shall prepend audio frames. The sequence byte shall be counting with wrap-around and allow the peripheral to detect buffer mismatch or underflow.
- An audio frame shall always fit into a single LE packet. The audio frame shall be sent as a separate L2CAP packet. The size of the LE LL PDU shall be:audio payload size + 1 + 6
- A connection event should always be large enough to contain 2 audio packets and 2 empty packets for an ACK to reserve bandwidth for retransmissions. Note that the audio packet may be fragmented by the central’s Bluetooth controller. The peripheral must be able to receive more than 2 fragmented audio packets per connection event.
To give the central some flexibility, the G.722 packet length is not specified. The G.722 packet length can change based on the connection interval that the central sets.
The G.722 output octet format references theRec. ITU-T G.722 section 1.4.4 “Multiplexer”
Codec |
---|
Also Check: Does Hearing Loss Get Worse Over Time
Widex Beyond Hearing Aids
Widex BEYOND hearing aids optimize sound based on your environment and feature a SMARTWIND Manager which reduces wind noise annoyance while increasing speech understanding. This hearing aid can be controlled using the BEYOND app to adjust sound and listening preferences, create sound templates for specific listening situations, alter microphone direction, personalisation and to find a misplaced hearing aid.
Although this is a Made for iPhone hearing aid, some Android users can stream sound directly to this hearing aid from any Bluetooth-enabled device by using the Widex COM-DEX and can download the BEYOND app from Google Play on selected Android devices.
Available at: Hearing Savers among other audiologists and audiometrists. You can also find a Widex Supplier near you.
More information at:
Using Your Mobile Or Smartphone

There a things you can do to make your mobile or smartphone easier to use.
These include:
- using them with your hearing aid if you have one, so that you can hear calls, music and sounds better
- using the accessibility features available
- using other helpful devices with your mobile or smartphone.
Its important to listen to your mobile or smartphone at a safe volume. Find out more about protecting your hearing.
Also Check: Why Do Sign Language Interpreters Make Faces
Hearing Aids Compatible Phone
If you want to find the phone which is compatible with your hearing aids. It is very important to know whether you will be listening to the phone through the hearing aids acoustically or through telecoil.
Telecoil Coupling
The telecoil is a small induction pick-up coil which can be placed inside a hearing aid. The telecoil is also known as a T-coil, or T-switch. When activated, the telecoil permits coupling of the personal hearing aid to sources of electromagnetic energy including a telephone and assistive listening devices and systems.
Acoustic Coupling
In Acoustic Coupling, a hearing-impaired individual listen to the phone by placing the receiver up to the hearing aids microphone. Usually, people with mild hearing loss use the acoustic coupling. This coupling allows you to hear background noise as well as the telephone signal through the hearing aid microphone.
How Do You Turn Off Hearing Aid On Android
How do you turn off your hearing aid on an Android phone? Follow these steps. First, turn on Bluetooth on your phone. You will see a list of your paired devices on the home screen. Touch and hold the name of your hearing aid, and then click Unpair. Once the device is unpaired, it will no longer receive calls from the phone. If the device is paired, it should appear in the Paired Devices list.
If your hearing aids are not pairing, try deleting the pairing. If this doesnt work, you may need to try pairing them again. If the app says your device is not whitelisted, simply try again. This should solve the problem. If your hearing aids are connected to Bluetooth but not turned on, try putting them in a charging station. You should see a message stating try again or device not whitelisted.
Recommended Reading: How To Get Ringing Out Of Ears After Shooting
How To Connect Your Hearing Aids To Your Smartphone
Many of todays hearing aids can be paired with your iPhone or Android mobile phone. This allows you to control the volume, adjust your sound preferences, and select specific hearing programs for different environments. In addition to giving you full control over the way you hear, many smartphone compatible hearing aids can do the following
- Stream calls and listen to music directly from your phone
- Keep a hearing diary, check battery life and get remote support
- Use cutting-edge features like language translation, health monitoring, and fall detection
Connecting to your hearing aids depends on the model of your hearing aids and your smartphone. For your convenience, weve outlined the steps you need to take to connect your hearing aids to your iPhone or Android mobile phone.
What Is That Buzzing Noise In My Cell Phone
People who wear hearing aids or have implanted hearing devices may experience some difficulties when trying to use cell phones. That buzzing noise you hear is interference due to radiofrequency emissions from your phone. RF interference does not occur for all combinations of digital wireless telephones and hearing aids. However, when interference does occur, the buzzing sound can make understanding speech difficult, communication over cell phones annoying, and, in the worst case, render the cell phone unusable for the hearing aid user.
Fortunately, the compatibility of cell phones and hearing aids is improving. Some cell phones have lower radiofrequency emissions or use different technologies that can reduce the unwanted effects on hearing aids.
Don’t Miss: Can An Ear Infection Cause Jaw Problems
What Took So Damned Long
The issue for the hearing aid brands has always been the Android operating system and the fragmentation of it and the hardware used in Android phones. Android is an OS that is used on many phones from many different phone brands, that has meant that the Android experience on Samsung devices is quite different than on HTC devices. It also means that the hardware used in those phones is also often different. This ensures that designing hearing aids that will work with every Android phone is an insurmountable task. However, with the introduction of Android P, that began to change.
Android wrested back a lot more control over the OS with Android P, especially the Bluetooth management system. It means that the part of the operating system that will help hearing aids connect will now be the same across phones with Android P. The inbuilt hardware is something they won’t control though, but, we can expect every major phone brand to follow suit quickly because they understand the value of hearing aid direct connection. With the introduction of Android Q or 10, finally, the system is available to Pixel 3 phone owners.
What Brands Do Made For Android Hearing Aids
In 2019 both Resound and Starkey showed innovation by launching Made for Android hearing aids using low-energy Bluetooth technology. With the streaming done using Bluetooth Low Energy , both hearing aids and phones can have enough battery power to get through an entire day.
However, this was only successful on recent Android phones operating with the Android 10 platform – back then it was only Google Pixel 3 and 4 that were compatible, but more and more are becoming available for compatibility. The current Made for Android hearing aids are Starkey Livio, Phonak , Unitron Discover and Resound Quattro.
Read Also: Why Are Hearing Aids So Expensive
Direct Streaming To Hearing Aids From Android Phones Now Available Gn And Cochlear Become First To Offer Feature
BALLERUP, DENMARK A little over a year after announcing a to bring the full spectrum of direct audio streaming from Android devices to hearing aids, GN Hearing and Google today announce world-first support for direct streaming from Android devices to hearing devices using Bluetooth® Low Energy .
This will make GN Hearing the first manufacturer to provide this capability for Android devices, one that was previously only available to iPhone users.
Cochlear, which collaborates with GN as part of its Smart Hearing Alliaince, will also be bringing the capability to wearers of its compatible implant devices.
Connecting To Your Android Mobile Phone

Its important to note that not all hearing aid models are compatible with Android devices. Check the user manual, manufacturers website, or ask your hear.com hearing consultant to ensure your Android works with your hearing aids.
- Turn on your hearing aids.
- Open Google Play and download the app for your specific hearing aid if one is available. The app might be able to walk you through the process of pairing your devices. Otherwise, continue with step 3.
- Go to Settings on your phone.
- Tap Connected devices> Pair new device.
- Choose your hearing aid from the list of available devices. If you have more than one hearing aid: Wait for the first hearing aid to connect, then tap the other hearing aid in the list of available devices.
This video from Oticon demonstrates how to connect one of their hearing aids to your Android device. For the other hearing aid manufacturers, the specific software will be different, but the general process is similar.
If you need additional help connecting your hearing aids to your phone, please give us a call at 888-780-3450 so we can assist you.
Jesse Botella
Jesses love for attending rock concerts without ear protection caused him to develop noise-induced hearing loss in his right ear. He now uses his personal experience and passion for words to write about hearing loss and the benefits of wearing hearing aids.
Don’t Miss: How To Know If Ear Piercing Is Infected
How You Can Benefit From The Combination Of Hearing Aids And Smartphone
All hearing aids equipped with Bluetooth technology are suitable for connection to the smartphone. In addition, the manufacturer of your hearing aids must provide an App for operating the hearing aid. At KIND this App is called KINDiLink and is available free of charge for Apple and Android mobile devices.
The App allows you to conveniently control the hearing aids with your smartphone: for example, you can make settings on the hearing aids, such as adjusting volume and sound, and select hearing programs. The hearing programs can not only be changed, but can also be personalised in different listening environments via so-called geotagging. To do this, the App for your hearing aids uses the GPS location function of the smartphone. It allows you to save sound settings depending on your location. The next time you are in the same location, the App will automatically activate the appropriate personalised hearing program.
Pairing hearing aids and smartphone offers further advantages. If you play music on your phone, the sound can be transferred directly to the hearing aids. The sound can be adjusted via the app. The same applies to phone calls, which can also be routed to your hearing aids. The advantage: You understand your conversation partner perfectly, there is no disturbing background noise.
Are Android Phone Hearing Aid Compatibility
Are Android phones compatible with hearing aids? The made for Android hearing aids work with smartphones and tablets updated to Android 10 or higher. While they do not currently stream audio, they do allow users to make hands-free calls. Made for Android hearing aids are a growing trend. While many consumers have mixed feelings about the app, it is worth the extra cash to have the feature. It will also allow users to hear sounds without disturbing anyone around them.
To make your hearing aids compatible with your Android phone, you need to download an app that enables Bluetooth connection. You can download the app from Google Play or the hearing aid manufacturers website. If the hearing aid doesnt pair with your phone, you can contact the manufacturer to learn about the other options available. If the hearing aids are compatible with your Android phone, you should follow their guidelines for pairing the device.
Read Also: Do Hearing Aids Need To Be Fitted
How Do You Pair Bluetooth Hearing Aids To Your Iphone
The process to pair an Apple device isn’t hard, you need to know where to look to do it. Usually, the app that accompanies the hearing aids will have clear instructions in the first run. Pairing the hearing aids is beneficial because when you pair a Made for iPhone hearing aid to your iOS device, audio from your iOS device goes to your hearing aid. If you turn off your hearing aid, you need to reconnect it when you want to use it with your iOS device again.
To pair your hearing aid with an Apple iPhone or iPad, follow these steps:
You can start using your hearing aid when you see it under Devices with a checkmark.
Other Features Of Hearing Aid Mode On Cell Phones
- Volume control Most phones have adjustable volume control.
- Display and keypad lighting control -It is important because the lighting is a source of noise for telecoil users.
- Vibrating alerts or vibrating accessory.
- Flashing screen to alert to a call.
- Different ringer volume and tones.
- Text messaging services and ease of its usage on the phone device.
- Speakerphone Using a speakerphone may reduce interference by putting distance between the phone and the hearing aid.
- Teletypewriter or other assistive device connections. Make sure the phone has TTY Mode or TTY Option in its menu system. Look for the TTY symbol on the phones package or user manual.
- Speech-to-text.
- Video streaming In this type of media, the data from a video file is continuously delivered via the internet to a remote user.
Don’t Miss: How Do You Fix Hearing Loss
Galaxy Phone And Tablet Hearing Enhancement Features
Hearing loss doesnt mean you need to miss out on features from your phone or tablet. You can still enjoy great sound quality when playing a game or using a hearing aid, and there are options for notifications and alerts as well. Just adjust the Hearing enhancements on your Galaxy to suit your needs.
Note: Available screens and settings may vary by wireless service provider, software version, and model.
How To Pair Your Hearing Aid With The Phone
First, your hearing aids and phone must be compatible for pairing. The level of compatibility depends on the technology used by each device. Not all smartphones will work with your specific type or model of hearing aid, so do some research to see what options are available before purchasing if youre unsure which one is best for you. Secondly, the hearing aid must be in pairing mode before it can connect with the phone. The method for putting your device into this mode depends on its make and model, so consult the manufacturers guide or website if you need help.
Thirdly, turn on Bluetooth to ensure that it is enabled on both devices. Finally, open your smartphones Bluetooth settings menu to search for the device youre trying to pair with. Your phone should automatically recognize it once it is within range of both devices. Once paired successfully, use the volume buttons located on either side of your hearing aid to adjust the volume on your smartphone.
Recommended Reading: Is It Bad If My Ears Are Ringing