How To Pair Phonak Hearing Aids

How To Use Avantree Transmitter With Phonak Hearing Aids

Pairing Phonak Marvel Hearing aids to an Android phone

This guide applied to multiple products.

This guide applies to multiple products

Go to the full support page of the related products: TC417, Oasis , Oasis Plus, DG60 , Audikast Plus, DG80, Orbit, Oasis B

You could pair your Phonak Hearing Aid with Avantree Bluetooth transmitters via Bluetooth. Please follow the steps like this:

Step 1. Disconnect Phonak from Other devices – Turn off Bluetooth on your cellphone and ANY other devices you have used with the Phonak Hearing Aids via Bluetooth before. Step 2. Get the Avantree Bluetooth transmitter into Pairing mode.

What To Do If Your Made For Iphone Hearing Aids Wont Pair With Your Iphone

If you are having difficulty successfully paring your devices, try these troubleshooting steps.

Make Sure Your Software Is Up to Date

Step 1: Go to your Settings from the home screen.Step 2: Scroll down and tap General.Step 3: Select Software Update. Any available updates will appear on this screen.

Check for software updates

Check Connectivity

Step 1: Put your phone screen to sleep by tapping the button on the right side or top of your phone, depending on the model.Step 2: After five seconds, tap the button again.Step 3: Open the control center by either swiping down from the top right corner of the screen or swiping up from the bottom of the screen .Step 4: If your device is connected, you will see the name next to AirDrop.

Step 5: If you do not see your device name here, try going to Settings and tap Bluetooth. Wait on this screen for a few seconds. Then check the control center again.

My Hearing Aids Arent Producing Any Sound

Visually examine the hearing aid. Is there earwax blocking the microphone opening or sound outlet? Carefully clean away any debris.

Make sure your hearing aid is turned on. Hearing aids are usually powered on by closing the battery door. If the battery door wont shut easily, the battery is likely upside down. Take the battery out, flip it and try inserting again. If placed properly, the door will close easily.

Turn up the volume with your remote control or directly on the hearing aid. If you have a manual volume control wheel, adjust the wheel up and down a couple of times to make sure itâs all the way on.

Toggle between the programs or memories. If you have a button to change settings, press it and listen for several minutes to see if that makes a difference.

Replace the battery. If you have a hearing aid battery tester, check the voltage of the old battery to confirm its dead before activating a new battery by removing the sticker.

Consider whether the hearing aid may be damaged. Contact your hearing care professional for further assistance. They may have walk-in hours or same-day appointments for troubleshooting and hearing aid repair.

for troubleshooting common hearing aidproblems!

Don’t Miss: How To Pair Compilot With Hearing Aids

How Do You Pair Bluetooth Hearing Aids To An Android Device

The process to pair an Android device is pretty simple, you need to know where to look to do it. Usually, the app that accompanies the hearing aids will have clear instructions at the first run. While you wont be able to stream audio from your Android device yet, pairing the hearing aids is still beneficial. It will allow you to use the accompanying app and will give you better control over your hearing aids.

Go to the Android phoneâs home screen and tap on the âSettingsâ icon.

In the settings menu, tap on the Bluetooth icon.

Tap on the slider button to turn Bluetooth on.

Open both of your hearing aid battery doors for 5 seconds then close the battery doors .

If you have rechargeable devices with no battery door, put them in the charger for five or ten seconds and then take them out, this will put them in pairing mode

On the Android phone, you will now see a message, âAvailable Devices.â If you dont, click scan for available devices.

The name of your hearing aids should appear on the screen. Tap on both of them to select and pair them.

A connection beep will be heard in the paired hearing aid.

Your Android phone should now be connected to your hearing aid.

Connecting To Your Android Mobile Phone

Pairing your Phonak hearing device with Androids

Its important to note that not all hearing aid models are compatible with Android devices. Check the user manual, manufacturers website, or ask your hear.com hearing consultant to ensure your Android works with your hearing aids.

Turn on your hearing aids.
Open Google Play and download the app for your specific hearing aid if one is available. The app might be able to walk you through the process of pairing your devices. Otherwise, continue with step 3.
Go to Settings on your phone.
Tap Connected devices> Pair new device.
Choose your hearing aid from the list of available devices. If you have more than one hearing aid: Wait for the first hearing aid to connect, then tap the other hearing aid in the list of available devices.

This video from Oticon demonstrates how to connect one of their hearing aids to your Android device. For the other hearing aid manufacturers, the specific software will be different, but the general process is similar.

If you need additional help connecting your hearing aids to your phone, please give us a call at 888-780-3450 so we can assist you.

Jesse Botella

Jesses love for attending rock concerts without ear protection caused him to develop noise-induced hearing loss in his right ear. He now uses his personal experience and passion for words to write about hearing loss and the benefits of wearing hearing aids.

Read Also: Hungry In Sign Language

Care Tips For Hearing Aids

Clean your hearing aids regularly to keepthem working reliably.

Get the proper tools: A wax pick and brush are indispensable tools for at-home cleaning. Earwax can accumulate in the opening at the end of a hearing aid where the sound comes out causing muffled sound or feedback . Left long enough, it can damage the receiver. Use the pick and brush to gently clear wax away.
Establish good habits: Always wash your hands well before cleaning your hearing aids. Leave hearing aids out during your hygiene routine. Shower and wash your face and hair without your hearing aids in so water and soap cant damage them. Put your aids in after you apply hair products like sprays or gels.
Clean your device at the end of the day: Cleaning your hearing aids before bedtime gives them several hours to air out before you will put them in again. Avoid wipes with chemicals or alcohol when cleaning hearing aids as they could damage the devices.
Avoid extreme heat or cold: If the temperature is below freezing and you take your hearing aids out of your ears to shovel the driveway, leave them inside the house instead of stashing them in your coat pocket. Likewise, if you take your hearing aids out to jump in the pool on the hottest day of the summer, take them inside the house instead of leaving them on a poolside table.

Dont Turn Up The Volume

If you often turn up the volume on the TV, your family has probably been asking you to turn it down, and they complain that its far too loud. When the TV is loud, you can hear some of the dialogue. But even with the volume on high, you still cant quite make out whats being said. Thats because hearing loss doesnt affect all sounds in the same way. Youre more likely to have hearing loss in higher frequencies. Youll have a harder time hearing high pitched sounds such as consonants. This means that hearing loss will affect sound clarity, not just volume.

Read Also: Phonak Compilot Ii Pairing

How To Adjust Your Own Hearing Aids

This is a guest article by Daniel Taft.

Daniel Taft is an engineer with a PhD in cochlear implant sound processing from the University of Melbourne and the Bionic Ear Institute. He is the Chief Technology Officer for Blamey & Saunders Hearing, a company that offers hearing aids scientifically designed to order online and adjust at home.

Step 1 Choose The Hearing Aids.

You will need to buy hearing aids that you can adjust at home, from a reputable dispenser. The company I work for, Australia Hears, offers hearing aids that are specially designed to adjust yourself. Its easy to do, and our clients get great results.

In general, we recommend choosing a hearing aid with five important technologies:

Multiple frequency channels so that you can adjust each frequency independently of the others. We use 32 channels.
An adaptive directional microphone that automatically becomes directional in noisy situations so that you dont have to change programs. This makes a drastic improvement to quality of speech in noisy environments.
An open fit hearing aid offers greater comfort and does not require a custom ear mould.
A good feedback canceller. This allows greater amplification without whistling and is essential for an open fit device.
A low delay processor. This reduces the echo perceived from a time delay between air conducted sound and amplified sound.

Step 2 Install The Software.

Step 3 Adjust At Home.

Ask Your Hearing Aid Provider If Your Hearing Has Declined

Pairing Phonak Marvel Hearing Aids with IPhone

If the problem persists, consider the possibility that your hearing loss may have changed and your hearing aids may need to be reprogrammed.

Visit your local hearing healthcare provider for a hearing test to determine if its time to reprogram or replace your hearing aids to support your changing hearing loss.

Don’t Miss: Sign For Poop In Sign Language

Common Hearing Aid Problems

The most common hearing aid problems are no sound produced, decreased volume and sound quality, distorted sound quality, and whistling or feedback sounds. Learning how to detect these issues and developing a habit for regularly checking if your hearing aids are working correctly allows you to troubleshoot them quickly, or ask a hearing aid practitioner right away:

Dont Miss: Sign Language For Im Sorry

Auscultation With Hearing Aids

If you are working in the medical field, you may have run into the challenge of using a stethoscope with your hearing aids, particularly when performing auscultation.

Auscultation is the act of using a stethoscope to listen to the internal sounds of the body. Through auscultation, medical professionals can analyze heart and lung sounds for differential diagnosis, according to A.U. Bankaitis Smiths article 20Q: Amplified stethoscopes for medical practitioners.

A question often asked by hearing aid wearers is, how should my hearing aids interface with the stethoscope?

Recommended Reading: How To Say What Are You Doing In Sign Language

How To Pair My Compilot Ii To My Phone

To begin pairing, remove the ComPilot II from the patientâs neck and switch ComPilot II on.

Place the ComPilot II and cell phone next to each other.

Find the connectivity settings of the phone menu program and switch on the Bluetooth settings.

Press and hold the connect and volume up buttons simultaneously until the audio indicator starts to rapidly blink blue.

Select âPhonak ComPilot IIâ from the list of found Bluetooth devices.

If asked, enter 0000 and accept the request to access the phone book.

Pairing is successful when the audio indicator light stops blinking blue and the phone shows the ComPilot II is connected.

A quick pairing instruction is also shown on the back of ComPilot II.

Make Sure They Are Clean

Many repairs are a minor problem and can be performed at home. The first thing you should check is that your hearing aids are clean of all debris and wax, that the batteries are fresh and that they are not set to the telecoil setting. In addition, make sure the hearing aid is actually in the on position and the volume is adjusted correctly. Inspect your hearing aids for visible signs of damage. If you see damage, its time to get them to the audiologist for repair.

The Best Phonak Hearing Aid Accessories At Wholesale Hearing

At Wholesale Hearing, we offer the very latest in Phonak hearing aid technology, from top of the range new market aids, to the best Phonak hearing aid accessories to enhance your use. Our audiologists are on hand to make sure that not only do you get the hearing aid device tailored specifically to you, but that you have the best experience using it. Browse our range of Phonak hearing aid accessories today

Review For Phonak Compilot Ii Bluetooth Streaming And Remote Control

Rated 5 out of 5

Alasdair Roy September 23, 2020

I was quite skeptical about this purchase, wondering why a Bluetooth device to connect hearing aids would cost so much. But since receiving it promptly from the website it has changed my life, I can finally hear music like I used to, hear words during phone calls and it connects to almost anything that uses Bluetooth. A brilliant peice of kit with excellent features!

Oticon Opn/xceed Hearing Aids

You will need a ConnectClip to connect your Oticon Opn hearing aids to your computer. The Oticon Opn hearing aids are Made for iPhone which means they will only directly stream music from an iPhone, iPad, or iPod. If you dont have a ConnectClip for your Opn/Xceed hearing aids, be sure to contact your audiologist for purchasing options.

Streaming With Your Fm/dm System:

How to connect Phonak Marvel hearing aids to Bluetooth enabled devices

If you dont have a hearing aid accessory for your hearing aids such as a Streamer Pro or ComPilot II, then you can also stream audio with your FM/DM system! Each FM/DM System Transmitter will have an Aux input port. Once connected with the hearing aids, the Aux cord can be plugged into the computer or audio device, and the other end of the Aux cord will plug into the FM/DM System Transmitter. If you dont have an Aux cord, this one will work great:

Hear Indiana has an Assistive Technology Loaner Bank to allow families to trial an FM/DM system for up to 6 weeks at no charge. To learn more or inquire about a loaner system, .

How Do You Pair Bluetooth Hearing Aids To Your Iphone

The process to pair an Apple device isnât hard, you need to know where to look to do it. Usually, the app that accompanies the hearing aids will have clear instructions in the first run. Pairing the hearing aids is beneficial because when you pair a Made for iPhone hearing aidÃ to your iOS device, audio from your iOS device goes to your hearing aid. If you turn off your hearing aid, youÃ need to reconnect it when you want to use it with your iOS device again.

To pair your hearing aid with an Apple iPhone or iPad, follow these steps:

Open your hearing aidâs battery doors.

On your iOS device, tap Settings > General > Accessibility > Hearing > Ã MFi Hearing Devices.

If Bluetooth is off, turn it on under Devices.

Close your hearing aidâs battery doors.Ã Your iOS device will search for your hearing aid.

Under Devices, tap the name of your hearing aid.

Tap Pair when you see the pairing request on the screen. If you have two hearing aids, youâll get two requests.Ã The pairing could take up to a minute.

You can start using your hearing aid when you see it under Devices with a checkmark.

A Solution For Every Listening Environment

Phonak has a solution for every listening environment. If you are talking about the hearing aids alone, we have Zoom technology. Within our devices we have different unique features such as Zoom Control, StereoZoom, and DuoPhone. We have all these different ways to utilize UltraZoom directional microphone technology to provide you with exceptional listening in every listening environment. Those are things that are all integrated into the hearing instruments through our adaptive microphone system.

The RemoteMic is an additional device with a range of up to 60 feet. The microphone strategy is omnidirectional because we did not want you to have to worry about giving it to an individual and be unsure about the direction they place it in. If you are handing it to someone to utilize at a lecture, you do not want to say, Make sure that you point it straight up or that it is pointed a certain way. You can just give it to them for immediate use. For a number of sources, it is a one-on-one device. It is also independent of head movement. You do not necessarily have to worry about it because it is coming from the source directly to the hearing instruments. As long as you are in the proximity, you should get a nice signal from it.

Dont Miss: Phonak Tv Link Pairing

Phonak Compilot Product Review: Wearing A Necklace Of Sounda Product Of Interest To People Who Are Deafblind Or Hard Of Hearing

Contemporary technology has stepped up to meet the challenge of significant hearing loss head-on with some amazing tools. Today, there are many options for augmenting residual hearing. The Phonak ComPilot is of note for its performance, but also in that it is an example of wearable technology.

The ComPilot is a tiny listening device that serves as a direct link between your ears and your phone, your portable book player or other audio device, your computer, your TV, and other devices. It is a necklace of sorts, designed to work with a variety of Phonak hearing aids. When it is around your neck, all manner of sound can be delivered directly into your ears.

When you dont want to hear the audio generated by any device, but only to hear the sounds in your environment, the ComPilot can serve as a remote control for your hearing aids.

Description

The ComPilot is a silver and black rectangle, roughly 2 inches by 2.5 inches, with a rounded top and a neck loop that acts as an antenna attached to holes on either side on the top edge. Sound streaming is only possible when the ComPilot is worn around the neck.

The ComPilot package includes the unit, the neck loop antenna, an audio cable for connecting to audio devices, a mini USB cable, and an AC adapter.

Other accessories and components for connecting are also available, but lets first talk about what the ComPilot can do in its basic form.

Don't Miss